Roof Measurement Software for Contractors
Turn photos, plans, or satellite imagery into accurate roof measurements, a full material takeoff, and a branded quote PDF — in minutes, not weeks. No climbing. No waiting on third-party reports.
Roof measurement software replaces the slow, error-prone process of climbing a roof, hand-sketching planes, and calculating squares with a digital workflow that measures the roof from imagery and turns it directly into a material takeoff. For roofing contractors, that means faster quotes, fewer site visits, and a defensible number the homeowner can trust.
Measure Home Pro goes a step further: the measurement isn't a standalone report — it flows straight into the estimate, the branded quote, the schedule, and the invoice on the same job record. One upload gives you the geometry, the materials, and the path to a closed job.
What Measure Home Pro calculates
Every number a roofer needs to order materials and write the quote — broken out per plane, not lumped into a single figure.
Total roof area
Ground plus waste-included square footage for every plane, summed to a total roof area in squares — the number you order materials against.
Pitch & slope
Per-plane pitch read from the geometry so area, waste, and material counts reflect the actual slope, not a flat footprint.
Plane breakdown
Each roof face is measured individually with its length, width, and area — no lump-sum guessing on complex roofs.
Valleys, ridges & hips
Linear feet of valleys, ridges, hips, and rakes are separated out so flashing, cap, and underlayment quantities are exact.
Waste factor
Set the waste percentage per job and every material quantity updates — bundles, underlayment, drip edge, and accessories.
Material quantities
Squares, bundles, underlayment rolls, drip edge, ice & water shield, ridge cap, starter, and nails — all calculated from the same takeoff.
Every roof type, every geometry
The engine reads the roof as it is — not as a single shape — so complex roofs are measured as accurately as simple ones.
Gable
Two sloping planes meeting at a ridge — the most common residential roof. Each plane measured independently.
Hip
Slopes on all four sides meeting at a ridge or point. Every hip plane and valley is broken out separately.
Mansard
Steep lower slopes with a flat or low-pitch top — pitch changes are handled plane by plane.
Gambrel
Two distinct pitches per side, like a barn. Each slope is measured with its own pitch and area.
Flat
Low-slope and flat roofs measured for membrane, coating, and insulation coverage.
Shed
Single-slope roofs — fast, accurate area and material count for additions and outbuildings.
Complex / multi-plane
Dormers, intersecting gables, and cut-up roofs — the engine reads every face, valley, and junction.
From measurement to material takeoff
The same measurement drives a complete, supplier-ready material list — with your waste factor applied to every line.
Squares & bundles
Total roof area converted to shingle squares (100 sq ft) and bundles, with your waste factor applied.
Underlayment
Synthetic or felt — rolls calculated from total area with overlap and waste included.
Drip edge
Linear feet of eave and rake edge for the drip edge metal count.
Ice & water shield
Eave, valley, and penetration lengths for self-adhering membrane, per code requirements.
Ridge cap & starter
Linear feet of ridge and eave for cap shingles and starter strip.
Nails & accessories
Fastener counts and accessory quantities derived from the same takeoff — ready for the supplier.
From upload to quote in minutes
Upload photos, plans, or imagery
Share roof photos, a PDF plan, satellite imagery, or drone shots — no special format required.
AI reads the roof geometry
The engine identifies every plane, valley, and ridge, then calculates area and pitch automatically.
Review & adjust the takeoff
See every plane and material line. Adjust waste, pitch, or quantities before sending — you stay in control.
Send a branded quote
Deliver a white-label PDF with your logo and terms, and track when the homeowner opens it.
Accuracy you can defend
Measure Home Pro is built human-in-the-loop. The AI produces the geometry and the quantities, but every plane, pitch, and material line is visible and adjustable before anything goes to the homeowner. That means the number on the quote is one you've reviewed — not a black-box figure you have to explain away.
Because the measurement is tied to the job record, you can re-run it in minutes when the scope changes, compare versions, and keep a defensible history of how the numbers were built — useful when a homeowner, adjuster, or supplier asks where a figure came from.
Who uses roof measurement software
Roofing contractors
Measure, quote, and manage every roofing job from one platform — no climbing, no waiting on third-party reports.
Insurance adjusters
Get defensible, per-plane measurements and material breakdowns fast to support claims and estimates.
Home inspectors
Add roof measurement to an inspection without a second visit — document area, pitch, and condition together.
Solar installers
Accurate roof area and pitch feed directly into system design and panel layout.
How we compare to the old way
Roof measurement software FAQ
Roof measurement software calculates the area, pitch, and material quantities of a roof from photos, plans, or imagery — without requiring a contractor to climb the roof or order a third-party report. Measure Home Pro turns that measurement into a full material takeoff and branded quote in the same workflow.
Measure Home Pro reads the roof geometry from your photos, plans, or satellite imagery and calculates area, pitch, and waste using industry-standard formulas. Every plane, valley, and ridge is broken out individually, and you can review and adjust each line before sending the quote — so the final numbers are ones you can defend.
Yes. Upload satellite or drone imagery and the engine extracts the roof outline, pitch, and plane areas — no need to climb the roof or schedule a second site visit. This is ideal for remote estimates and for re-running numbers when the scope changes.
You set the waste percentage for each job based on the roof complexity and material. Every material quantity — squares, bundles, underlayment, drip edge, ice & water shield, ridge cap, and nails — updates automatically with that waste factor applied.
The takeoff includes shingle squares and bundles, underlayment rolls, drip edge (eave and rake), ice & water shield, ridge cap, starter strip, and fasteners — all calculated from the same measurement so the list is ready to send to your supplier.
Gable, hip, mansard, gambrel, shed, flat, and complex multi-plane roofs with dormers and intersecting gables. The engine breaks down each plane, valley, and ridge individually so cut-up roofs are measured as accurately as simple ones.
Yes. Pro and Business plans include white-label, branded quote PDFs with your company name, logo, terms, and payment details. The homeowner receives a professional document they can trust.
No. Contractors pay a flat monthly or annual subscription — lead capture, roof measurement, material takeoff, and branded quotes are all included. Homeowners use the platform for free.
Yes. The roof measurement links to the same job record as the estimate, quote, schedule, and invoice — so the measurement flows through the entire workflow from first lead to final payment.
Measure roofs faster. Close more jobs.
Join roofing crews who measure, quote, and manage every job from one platform — free for homeowners, plans for contractors.
Explore other trades
One platform, every trade — see what else Measure Home Pro can do.